PHARMA WATER
The monitoring of “Purified Water” of “Water for Injection” in the pharmaceutical industry is highly regulated. These instruments comply with the highest pharmacopoeia standards.
Chlorine, Ozone, ClO2
Analyzer AMI Codes-II
Colorimetric process analyzer (DPD-method) for measurement and dosing control of disinfectants such as free chlorine, hypochlorus acid, chlorine dioxide, ozone, bromine, iodine and monochloramine.

  • For the continuous online determination of disinfectants based on the DPD colorimetric method (EN ISO 7393-2; APHA 4500 Cl-G.
  • Also applicable for water containing additives like corrosion inhibitors, cyanuric acid and antiscalants.
  • Measurement values: Free chlorine, chlorine dioxide, bromine and iodine, monochloramine or ozone.
  • Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers.
  • Integrated pH measurement with temperature compensation (available as option).
  • All usual dosing devices for disinfectants and pH control can be connected either through relays or analog output signals. Two independent controllers can operate simultaneously.

AMI Codes II(Data Sheet)Flyer AMI Codes II

Analyzer AMI Codes-II CC
Colorimetric process analyzer (DPD-method) for measurement and dosing control of disinfectants such as free chlorine, monochloramine, total residual chlorine and combined chlorine.

  • For the continuous online determination of disinfectants based on the DPD colorimetric method (EN ISO 7393-2; APHA 4500-Cl G).
  • Measurement values : free chlorine, monochloramine, total residual chlorine, combined chlorine, flow and if installed pH and temperature.
  • Complete system including measurement and control electronics, photometer, flow indicator, reaction chamber, reagent dosing system and reagent containers.
  • Integrated pH measurement with temperature compensation (available as option).
  • All usual dosing devices for disinfectants and pH control can be connected either through relays or analog output signals. Two independent controllers can operate simultaneously.
  • Seperate chemical cleaning module available as accessory.

AMI Codes II cc(Data Sheet)Flyer AMI Codes II ccCombinedchlorine Archiv Des Badewesens

CONDUCTIVITY
QA-Monitor AMI INSPECTOR Pharmacon
The portable AMI INSPECTOR is a complete on-line monitoring system mounted on a small panel with supporting stand and a rechargeable battery for stand-alone operation, designed as an inspection equipment for quality assurance of online, conductivity measurements in pharmaceutical applications.

  • Conductivity measurement range: 0.055 to 1’000 µS/cm
  • Rechargeable battery for stand-alone operation for at least 24 hours
  • Transmitters and sensors available for pharmaceutical applications

AMI Inspector Pharmacon(Data Sheet)Flyer Influence Of Temperature On Electrical Conductivity Of Diluted Aequas Solutions

Total Organic Carbon
Monitor AMI LineTOC; AC
On-line analyzer for the continuous measurement of Total Organic Carbon in pure and ultrapure water. Reagent-free measurement of TOC by UV oxidation and differential conductivity detection.

  • System suitability test according USP <643> and EP 2.2.44.
  • Automatic addition of standard solutions.
  • Automatic dilution of standards to 500 ppb TOC as Sucrose and to 500 ppb TOC as Benzoquinone.
  • Reaction Time: < 2 Minute
  • Factory tested and ready for installation and operation.

Monitor AMI linetoc (Data Sheet)Fde AMI_ Linetoc New (Flyer) TOC-Messung in Reinstwasser.pdf (166kB)